1、 Product details

Brand: Hongjie water;

Model: professional customization (0.25t/h -- 1000t / h);

Influent water quality: municipal tap water or well water;

Effluent quality: pure water quality meeting customer requirements;

PH range: 2 ~ 13;

Operating temperature: 5 ~ 45 ℃;

Removal rate of microorganism and bacteria: 99.99%;

Suspended solids removal rate: 99%

2、 Introduction to ultrafiltration equipment

Ultrafiltration system is a membrane separation process with screening as the separation principle and pressure as the driving force. The filtration accuracy is 0.005-0.01 μ M, which can effectively remove particles, colloids, bacteria, heat sources and polymer organic substances in water. It can be widely used in the separation, concentration and purification of substances. The ultrafiltration process has no phase transformation and is operated at room temperature. It is particularly suitable for the separation of heat sensitive substances. It has good temperature resistance, acid and alkali resistance and oxidation resistance. It can be used continuously for a long time under the conditions of below 60 ℃ and pH 2-11.

3、 Characteristics of ultrafiltration equipment:

1. The ultrafiltration water treatment system has no phase change during operation and can be separated at room temperature and low pressure, so the energy consumption is low, about 1 / 2 ~ 1 / 5 of that of evaporation method and refrigeration method;

2. The equipment has small volume and simple structure, so the investment cost is low and easy to implement;

3. The ultrafiltration separation process is only a simple pressurized liquid transportation, the process flow is simple and easy to operate and manage;

4. The solution has no qualitative change in the process of separation and concentration, so it is suitable for the treatment of taste preserving and heat sensitive solutions;

5. It is suitable for separating trace noble macromolecular substances from dilute solution and recovering low concentration macromolecular substances;

6. It can separate substances with different molecular weights by stages;

7. Ultrafiltration membrane is a uniform continuum made of high molecular polymer without any impurities in the process of use;

Service status: cross flow filtration or full filtration, back flushing and rapid flushing;

Backwashing pressure: < 0.1MPa;

Backwashing flow: 200L / m2 / hr;

Backwashing frequency: 15 ~ 60min with the influent water quality;

Backwashing time: 30-60sec;

Chemical flushing: depending on membrane material and membrane pollution;

Sterilization treatment: NaClO flushing once a week to once a month;

Features: it can significantly improve the flushing intensity and is conducive to membrane regeneration;

Manufacturing industry: automobiles, glass, steel, paper, textile, etc

Power industry: boiler, thermal power generation, cooling cycle, etc

Catering industry: beverage, food, dairy industry, drinking water Hotel, etc

Electroplating industry: coating lighting, cooling, metal plating LED lamps, etc

Photoelectric industry: photovoltaic lighting, new energy LED lamps, etc

Electronic industry: Electrical chip, circuit board, single chip microcomputer, electronic components, etc

Pharmaceutical industry: Pharmaceutical devices, oral liquids, finished drugs, biological agents, etc

Energy industry: extraction of polysilicon metal from oxidized semiconductor silicon materials